Control panel, controller or control board? Heat pump and refrigeration controls explained

Heat pump and refrigeration systems rely on several distinct control components, yet the terms used to describe them are often inconsistent. Control panel, controller, control board and thermostat are frequently used interchangeably, in specifications and in supplier enquiries alike. Specifying the wrong component can delay an installation and add avoidable cost.

This guide defines each term, explains how the components relate to one another, and sets out which is appropriate for a given application. It draws on over 40 years of experience designing and manufacturing control panels for heat pump and refrigeration systems.

Heat pump controls

Control board

The control board is the printed circuit board fitted inside the heat pump by the original equipment manufacturer. It manages the unit’s internal functions and, if it fails, is normally replaced with a like-for-like part from that manufacturer. Searches for a heat pump control board or circuit board often relate to spares and repairs.

Controller

The controller provides the system’s decision-making. Whether a dedicated electronic controller or a PLC, it processes sensor inputs, regulates temperature by controlling refrigerant flow, manages the changeover between heating and cooling modes, and identifies faults. On smaller standalone units, the controller may be the only control element required.

Control panel

A heat pump control panel is a complete, enclosed control system for commercial and industrial installations. Alongside the controller, it typically incorporates the operator display (HMI), temperature sensors, timers, diagnostic monitoring, and the switchgear that powers and protects compressors, fans and pumps. Where a heat pump forms part of a wider building services installation, the control panel ensures the system operates safely, efficiently and as a coordinated whole.

In summary, the control board is a component of the heat pump, the controller determines how the system behaves, and the control panel is the engineered assembly that runs the installation.

GB Controls designs and manufactures heat pump control panels in standard configurations and as bespoke designs, built to the requirements of each project. We specify and fit the appropriate controller within each panel, so the control system is supplied as one engineered assembly.

Refrigeration and cold room controls

The terminology in refrigeration is broader still. Refrigeration controller, cold room controller, fridge controller, freezer control panel and refrigerator control panel all appear in enquiries, but most refer to one of three levels of control.

Thermostat

The most basic form of control, switching refrigeration on and off to maintain a set temperature.

Digital controller

A digital refrigeration or cold room controller extends this to manage defrost cycles, evaporator fans, and high and low temperature alarms. The EWNext controller, for example, has replaced the Eliwell EWPlus in our standard refrigeration panel range. With an optional Bluetooth module, engineers can commission the system, program parameters and monitor HACCP temperatures from a phone using the Eliwell AIR app.

Control panel

A refrigeration control panel houses the controller together with the switchgear, protection devices and wiring needed to operate the refrigeration plant. This is the part GB Controls designs and manufactures, with the controller specified and fitted inside. The appropriate panel depends on the equipment being controlled. In general:

  • Evaporator control panel: management of the expansion valve, evaporator fans and defrost
  • Condensing unit starter panel: starting and protection of the condensing unit compressor and condenser fans
  • Cold room control panel: control of the complete cold room installation
  • Auto changeover panel: automatic switching between 2 refrigeration systems (duty and standby) maintaining cooling if one system fails

Panels described as refrigerator, fridge, freezer or cooling control panels generally fall into these same categories. The name reflects the application rather than the function.

Quick reference

What people call it What it usually means Where to look
Heat pump control board, circuit board The manufacturer’s board inside the unit The heat pump manufacturer
Heat pump controller The electronics or PLC that makes the decisions Fitted within our heat pump control panels
Heat pump control panel Controller, display and switchgear in one enclosure Heat pump panels
Cold room thermostat Basic on/off temperature control Refrigeration wholesalers
Refrigeration controller, cold room controller, fridge controller Digital control of temperature, defrost, fans and alarms Wholesalers for a standalone unit, or ask for spare parts for our refrigeration control panels
Cold room, refrigerator or freezer control panel Controller plus switchgear for the whole cold room Digital Coldroom Control Panel
Evaporator control panel Control of evaporator fans and defrost Digital Evaporator Control Panel
Condensing unit panel Starting and protecting the condensing unit Condensing Unit Starter Panel
Chiller or cooling control panel A panel for a specific cooling system Bespoke panels

Specialist advice

If you are unsure which control solution your system requires, our team can advise on the most suitable standard or bespoke control panel. GB Controls has held ISO 9001 certification since 2003, and every panel is engineered around the system it will operate.

Call +44 (0)1282 871187, email sales@gbcontrols.co.uk or submit an enquiry.

Share this story

Twitter
LinkedIn